Copyright © 2015MaxMach (Registered under the name of Hangzhou Roll Forming Machinery | Powered by Lidgen International |
Links: sheet pile | Concrete pump
corrugated roof sheet making machine technical parameteers
|
||||
NO |
Item |
Para |
Remark |
|
1 |
Suitable material |
Type |
Colored coating steel |
|
Thickness (mm) |
0.4-0.7 |
|
||
Yield Strength (Mpa) |
230-300Mpa |
|
||
Width (mm) |
1250mm |
|
||
Wt of the Coil (t) |
5tons |
|
||
OD |
Φ1250mm |
|
||
ID |
Φ508 mm/Φ610mm |
|
||
2 |
Material of rollers |
NO.45 steel with chrome plate |
|
|
3 |
Forming Speed (m/min) |
About20M/min |
Not including cutting time |
|
4 |
Power Source |
AC400V, 50 Hz, 3 Phase |
Depend on final design |
|
5 |
Total power |
About16KW |
Depend on final design |
|
6 |
Dimension (L×W×H, m) |
See the layout |
Depend on final design |
Decoil →Guiding system →Roll forming →Post Cutting →Output the finished products to supporter
corrugated roof sheet making machine components
|
|||
Name |
Model/Name |
Quantity |
Technical Description |
1. Decoiler system |
Cantilever Decoiler |
1set |
Cantilever, hydraulic expanding, hydraulic motor actively release the sheet with light control |
2.Main forming system |
Feeding guide device |
1set |
1. Roller material:No.45 steel with surface hard chrome painted. 2. Roller inner supporting structure type: guide column 3. Planetary gear speed reducer motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 4. Cutting blade material Cr12 quenched treatment |
Roll forming system |
1set |
||
Post-cutting device |
1set |
||
3. Output system |
Product Supporter |
1set |
For supporting the finished panels and the length of each piece is 2m, two pieces. |
4. Hydraulic system |
1set |
Hydraulic station |
|
5. Electric control system |
1set |
PLC Control, encoder automatic cutting in length Operation stage: button AC frequency for adjusting the speed |
Maxmach group can design and manufacture different profile corrugated roof sheet making machine according to your requirements, pls send your requirements to our email :info@roll-forming.cn