PHONE +86 571 82897908 / E-MAIL INFO@ROLL-FORMING.CN

GLOBAL SITE

Floor decking roll forming machine
This floor decking roll forming machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling, continuous rolling and cold-forming, automatically cut to the size and specification which required ,and stacking the finishing panel automatically. The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realize the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.

Floor decking roll forming machine technical parameters


NO

Item

Para

Remark

1


Suitable material

Type

Colored coating steel


Thickness (mm)

0.4-0.7


Yield Strength (Mpa)

230-340Mpa


Width (mm)

1250


Wt of the Coil (t)

5


OD

Φ1350mm


ID

Φ508 mm/Φ610mm


2

Material of rollers

No45 chromeplate


3

Forming Speed (m/min)

About20

Not including cutting time

4

Power Source

AC380V ,50 Hz, 3 Phase

Will be according to actual design

5

Total power

About9KW

Will be according to actual design

6

Dimension (L×W×H, m)

See the layout

Will be according to actual design

Decoil → Guiding system → Roll forming → Post Cutting → Output the finished products to supporter


Floor decking roll forming machine components


Name

Model/Name

Quantity

Technical Description

1. Decoiler system

Cantilever decoiler

1set

Cantilever, hydraulic expanding, hydraulic motor actively release the sheet with light control

2.Main forming system

Feeding guide device

1set

1. Roller material:No.45 steel with surface hard chrome painted.

2. Roller inner supporting structure type: guide column

3. Planetary gear speed reducer motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear

4. Cutting blade material Cr12 quenched treatment

Roll forming system

1set

Post-cutting device

1set

3. Output system

Product Supporter

1set

For supporting the finished panels and the length of each piece is 2m,two pieces.

4. Hydraulic system

1set

Hydraulic station

5. Electric control system

1set

PLC Control, encoder automatic cutting in length

Operation stage: button

AC frequency for adjusting the speed


floor decking roll forming machine floor decking roll forming machine floor decking roll forming machine

Maxmach group can design and manufacture different profile floor decking roll forming machine according to your requirements, pls send your requirements to our email :info@roll-forming.cn

* E-mail
* Content
Product Name
Your Name
Company
Tel./Fax.
Msn/Skype
    MaxMach (Registered under the name of Hangzhou Roll Forming Machinery